PHUOC THANH CONSTRUCTION

Your Trust    ISO 9001 : 2015

News

News

THE OPENING CEREMONY OF PHU MY APARTMENT PROJECT

THE OPENING CEREMONY OF PHU MY APARTMENT PROJECT

– Congratulations to” THE CEREMONY OF PHU MY APARTMENT PROJECT “BETWEEN PHUOC THANH CONSTRUCTION CORPORATION AND ANI JOINT STOCK COMPANY.

?In the morning of November 9th, 2020, the groundbreaking ceremony of Phu My apartment project took place – the trade name of the project is Osimi Phu My. The ceremony took place in a solemn atmosphere with the participation of representatives from both sides of the company


?As for the representative investor, there are:

– Mr. HOANG CAO TIEN – Head of PMU

– Mr. TRUONG VAN NHO – Project Manager

* As for Supervision Consultant:

– Mr. HUỲNH QUANG NHAN – Head of Supervisory Board

Together with representatives of departments.

* Contractor’s side includes:

– Deputy General Director: Ms. VO THI LAI with representatives of departments

– Investor side ANI Company has been a successful investor in many large projects. In which, Osimi Phu My project is an apartment project located in Phu My town, where the crowded population is concentrated. Osimi Phu My project is designed and planned to be modern and smart to meet international urban standards.


Phuoc Thanh is a construction contractor with over 15 years of experience in the construction field of Design & Build. As one of the most prestigious contractors in the construction industry in Vietnam with hundreds of projects covering the whole country and internationally. Phuoc Thanh is committed to bringing the project on schedule – quality – safety and efficiency.

Some project information is undertaken by the main contractor Phuoc Thanh:

Location: Highway 51, Center of Phu My Town, Ba Ria – Vung Tau Province.

Total area: 5990 m2

Scale: 3 Block Apartments: A, B, C. each Block has 18 floors.

  • Total product: 624 apartments.

(News, Photo: Ptcons PR Dept.)

PHƯỚC THÀNH – Sự thành công của đối tác chính là sự thành công của chúng Tôi

Internal news, News

Human resource fluctuation after COVID-19

Human resource fluctuation after COVID-19

Whether you like it or not, COVID-19 decease still significantly affects the future of work in many professions. It is very important to grasp the picture of the upcoming recruitment market, helping businesses figure out the necessary steps and solutions. According to a preliminary assessment of the ILO (International Labor Organization), the world could lose 25 million jobs because of this epidemic. The epidemic has caused common limitations in all countries, regardless of whether it is a developed or a developing country. Labor in industries with high levels of exposure to epidemics, industries that cannot apply the “work from home” policy… all face the risk of unemployment or reduced working hours.

– According to the labor structure, Vietnam has a high rate of “unskilled labor”, accounting for 35% of the employment, along with a part of “informal labor”; these are the groups most susceptible to disease. “Developing countries face the same challenges, only with different levels of influence based on the labor structure. In addition, the difference will also depend on the ability to recover from the epidemic. This will rely on the country’s controlling and “destroying decease” capacity and its socio-economic policies in response to the effects of COVID-19 ″.

– Therefore, the HR world is facing many risks due to the increasingly complicated development of the Covid-19 epidemic. The biggest challenge facing HR departments right now is the task of coming up with possible solutions to balance workforce safety concerns with keeping the business running as usual. Therefore, they need to react quickly to respond to any situation before an HR crisis can unfold. Particularly at Phuoc Thanh Construction Corporation, information capture, and flexibility in disease prevention are always highly appreciated and must be focused on ensuring the progress of projects is not affected when committed with the owner. Therefore, not beyond the general trend of many other businesses, Ptcons still has to restructure to optimize the company’s operations, but its personnel is still maintained. In addition, to keep up with the fast schedule, the company also recruits more personnel to ensure construction quality and safety during fluctuating days.

See at: http://ptcons.com/tuyen-dung/chi-huy-truong cong-trinh.

– Since then, COVID-19 has been happening and its impacts on life, economy, and society are huge, which is a typical example of people living in the VUCA (Volatility, Uncertainty, Complexity) period (the concept to describe the ever-changing world). Therefore, each of us needs to prepare ourselves with a wealth of knowledge, the right skills for the future, and a flexible attitude. “The most important thing is the attitude to change and need to have cognitive flexibility, be comfortable with changes, curious about new things, not afraid of challenges and always be solution-oriented, hence everything will no longer have to be difficult and develop together for both the company and the employees.

(Tin,ảnh: Ptcons)

News

THE OPENING CEREMONY OF PHU MY APARTMENT PROJECT

THE OPENING CEREMONY OF PHU MY APARTMENT PROJECT

?Congratulations to” THE CEREMONY OF PHU MY APARTMENT PROJECT “BETWEEN PHUOC THANH CONSTRUCTION CORPORATION AND ANI JOINT STOCK COMPANY.

In the morning of November 9th, 2020, the groundbreaking ceremony of Phu My apartment project took place – the trade name of the project is Osimi Phu My. The ceremony took place in a solemn atmosphere with the participation of representatives from both sides of the company

As for the representative investor, there are:

– Mr. HOANG CAO TIEN – Head of PMU

– Mr. TRUONG VAN NHO – Project Manager

* As for Supervision Consultant:

– Mr. HUỲNH QUANG NHAN – Head of Supervisory Board

Together with representatives of departments.

* Contractor’s side includes:

– Deputy General Director: Ms. VO THI LAI with representatives of departments

– Investor side ANI Company has been a successful investor in many large projects. In which, Osimi Phu My project is an apartment project located in Phu My town, where the crowded population is concentrated. Osimi Phu My project is designed and planned to be modern and smart to meet international urban standards.

Phuoc Thanh is a construction contractor with over 15 years of experience in the construction field of Design & Build. As one of the most prestigious contractors in the construction industry in Vietnam with hundreds of projects covering the whole country and internationally. Phuoc Thanh is committed to bringing the project on schedule – quality – safety and efficiency.

Some project information is undertaken by the main contractor Phuoc Thanh:

Location: Highway 51, Center of Phu My Town, Ba Ria – Vung Tau Province.

Total area: 5990 m2

Scale: 3 Block Apartments: A, B, C. each Block has 18 floors.

  • Total product: 624 apartments.

(News, Photo: Ptcons PR Dept.)

News

Why Should We Use Aluminum Formwork In Construction Site

WHY SHOULD WE USE ALUMINUM FORMWORK IN CONSTRUCTION SITE

In the current construction industry, there are many formwork systems that can be mentioned such as natural wood form, industrial wood form, steel form, composite form, aluminum form etc., Each formwork system has its own characteristics but typically Aluminum type will create more constructional productivity, efficiency and cost savings more than the old methods. Casting concrete is the decisive factor for the construction progress of the works means that the quality, aesthetics, and construction cost of the project depending largely on this factor. With the change of technology and current formwork assembling materials, it has made great strides in the construction field.

With shaped aluminum formwork, the formwork execution process is shorter due to simple assembly, ensuring good concrete quality and surface aesthetics. Some outstanding advantages when using aluminum formwork must be mentioned as follows:

  1. High reusability:

Aluminum formwork can be used multiple times. Each aluminum set can be used 100-150 times, about 3-4 high-rise buildings, significantly reducing investment costs for construction contractors.

In order to minimize damage after use, it is necessary to meet the basic requirements such as:

  • Proper disassembly and assembly.
  • Use the required oil to spread on the surface and removal tool.
  • It is necessary to have a mechanism for supervision and sanctions handling during construction.
  1. Light, convenient structure, good stability, high bearing capacity:

This makes the assembly of the aluminum formwork very simple and convenient, quite lightweight, average 20 – 27 kg / m2, so it is easy to disassemble and move by hand without any support machinery. (Usually, the workers only need a wrench or small hammer to disassemble.) A skilled worker can install 20-30 m2 per day. With modern production technology, the design of the skeleton system linked to the aluminum plate not only ensures good bearing capacity but also minimizes weight.

  1. Tiết kiệm thời gian thi công:

The aluminum formwork system helps to assemble and dismantle quickly, shorten construction time, and save management costs.

When constructing, the workers just need to install according to the design drawing and geodetic positioning, the accessories in the aluminum structure are also made to meet the requirements for easy construction, ensuring bearing capacity.

Reduce a lot of time for workers to calculate, cut, and repair as with other types of formwork.

The average construction time of a floor has been significantly shortened, to only 3-5 days.

The supporting system is designed with 3 floors. After 36 – 48 hours, it is possible to remove the aluminum formwork in the sequence of walls, beams, and floors and retain that system at 2 adjacent floors.

  1. Wide range of applications:

Aluminum formwork can be effectively applied to most types of structural members such as floors, beams, columns, walls, and stairs. The more efficiency is when the number of typical floors, typical components in one or a building block is bigger.

  1. High value of utilization:

The utilization value of the aluminum formwork system is very high when it is possible to collect, recycle, or utilize the construction of other structures such as foundations, septic tanks, etc.

  1. Environmental sanitation:

All parts of the aluminum formwork are reusable after being dismantled, which helps to reduce site waste, ensuring a safe, clean and tidy building environment.

Lower carbon emission: Many developed countries have specified that wood formwork should not be applied in construction projects but must use renewable formwork. This shows an inevitable replacement trend in the near future.

  1. Flexibility:

The aluminum formwork has different standard sheet sizes, which are flexible to assemble according to the requirements of the respective projects. Only 10-15% of non-standard panels need replacing when reused for a new project, helping to reduce costs. Because the design standards of the aluminum formwork need carefully consider the number of standard sheets that can be used.

  1. Neat construction space:

The bracing system is also designed quite simply, by the single bracing system and the reinforcement bracing system. The ability to tweak is relatively easy. The construction space is airy, clean.

  1. Reduce the cost of defect work, plastering

Another advantage of aluminum formwork is the low possibility of structural deviation, the smooth and aesthetically pleasing concrete surface after construction. Significantly reduce the cost of completing works.

The concrete surface using aluminum formwork does not require plastering as with traditional formwork. Just sand and spray paint to finish.

  1. Easy to combine with other climbing formwork, sliding formwork:

However, it is necessary to calculate and based on construction type, the number of typical floors, and actual construction conditions, compare costs between progress shortening and formwork, labor costs to save costs, time, construction quality assurance.

News

Conclusion Of Internship Program At Hoang Kim Paris Project In Year 2020

CONCLUSION OF INTERNSHIP PROGRAM AT HOANG KIM PARIS PROJECT IN YEAR 2020

The review session of the internship program at Hoang Kim Paris in the year 2020 took place on the afternoon of September 16, 2020, this is the time when the students experience as real engineers on the construction sites of PTCONS. Representatives of the Company and the BCH of the project site Hoang Kim Paris had a meeting to exchange and listen to the students’ feelings.


— The representatives of the Company also instructed and answered the questions of the students about the cultural environment of the company, the career development path in the construction industry. The Site Board of Management of the Hoang Kim Paris also highly appreciated the spirit of self-awareness, obedience to the rules as well as very punctual working style. Hopefully, the students will continue to promote and develop in the near future and succeed in their career choices.


The internship process at the company in the position of Site Supervisor, helps students grasp concrete work, safety work, formwork, how to do inspection work at the site, based on the criteria to check whether those work are qualified or not, whether make effects in process or not. However, due to the short internship period, they did not have much time to study extra classes in other departments, units but it also partly helped them get practical exposure to the job and be more confident when they graduate and have a deeper understanding of the chosen career.

– The company and the Site Management Board wish the students, after the internship, will successfully complete their dissertation and will take steps firmly on the career path they are pursuing. In particular, the Company always welcomes and creates conditions for students to experience learning. If they are in the final school year, and they want to return to work, then the Company is ready to accept, Phuoc Thanh Construction Corporation is always ready to receive, accompanying with their steps.

(News, photo: Ptcons Marketing Department)

News

Going For Strong And Tough: The First Time As A Labor Safety Engineera

GOING FOR STRONG AND TOUGH: THE FIRST TIME AS A LABOR SAFETY ENGINEER.

Although the fourth year of the University is just over, with the spirit of inquisitive and eager to train herself, Hanh has had very interesting internship experiences at Phuoc Thanh Construction Corporation. Although it is the first time she “set sail”, she has gained many valuable lessons and experiences. It will be useful “luggage” to help her feel more confident and steady in her future work.

In addition to lectures in school, Labor Safety Engineer are also very active in looking for internships outside to both study and practice, between learning the theory in the lecture hall, then the practice is also very important. Therefore, choosing a reputable construction company, a team of a knowledgeable and experienced team to practice, it is even more important. And luckily, when third-year students were accepted by Phuoc Thanh Construction Corporation for an internship, a company with more than 15 years of experience in construction, a smooth human resource management system, a team of engineers are always dedicated to their work, complete with procedures, regulations, instructions for each specific job, all the necessary elements to support and help students in the first steps of life..

Through internships at companies, construction sites and projects, students are not only more active, but also have the opportunity to apply their learned knowledge into practice, update new knowledge and practice personal skills. . Although there are still many confusions between the theory and the practical environment, the students have truly immersed themselves in their work to feel more confident and understand their careers.

Practice your ability to handle situations and solve problems

Labor Safety Engineer is a job that always has many unexpected “stories”, so it is not suitable for passive people, who react slowly and do not grasp the situation and handle work in a slow manner. In general, students’ life is quite peaceful to see many bad things, crying and laughing in the real life. And only when going on the internship, the real environment can help the students witness and participate in those thrilling stories. If you do not get acquainted with these “erratic” circumstances, you will surely lose your temper and not solve the root of the problem, because, for the career of a Safety Engineer, neglect distraction for 1 second can cause many consequences, very serious loss. A saying that it will follow throughout the life of Safety Engineer: “Safety first”

Recalling her internship at the Site Board of Management of the Vinatex – Office Building project, Site Safety Board, Hanh happily reported:

After a period of 2 months at the construction site, I realized that the occupational safety and sanitation at the Vinatex Building project were generally fully implemented according to the company’s procedures and regulations. The project has built a good management system for occupational safety and sanitation strictly and responsibly for each individual. Comply with the provisions of the legal documents issued by the State. The work has well-organized training activities for employees so that they can understand and grasp the work effectively and safely. In addition, employees are equipped and provided with sufficient personal protective equipment. The work of fire prevention, rescue, and first aid is also focused on practicing. Machines are inspected before being put into use, to ensure the requirements of the law. Not only that, the project also measures the working environment, associates with the environmental company to collect solid waste, hazardous waste, monitors the environment periodically, and organizes activities to protect the environment.”

With the wise direction of the Board of Directors of Phuoc Thanh Construction Corporation, along with the dedicated help, sharing precious experiences of the Site Safety Board has helped me to become more confident and understand more the work of occupational safety and sanitation as well as having the opportunity to get acquainted with the OSH Management of Phuoc Thanh Construction Corporation at the Vinatex Building project.

Gain practical experience in management, training, and propaganda for employees to comply with regulations and requirements at the site to protect their lives, health as well as interests. Know how to manage and check records from human to machine. Understand how to test conventional and rigorous equipment, and how to store and implement compliance with records, processes, regulations, forms according to the ISO 9001: 2015 – 14001: 2015 System and OHSAS 18001: 2007. Implement and issue safety training card and equip workers with sustainable industrial development. In addition, there is more understanding about the psychology and needs of the employees, from which we can consider and propose measures to improve occupational safety and health factor to ensure the best safety for labor.

Not only that, but I can also learn from the brothers and sisters in the project about their style, assessment style, recognition of things and working attitude, how to handle, and solve all situations. All of them have been working actively to avoid unfortunate accidents, to ensure the safety and interests of employees, contribute to improving the quality of labor to ensure the correct construction schedule, but still ensure safety. Being able to study and work at Phuoc Thanh Construction Corporation is a great honor for myself – a student with many shortcomings. With a dynamic working environment and enthusiasm and always willing to help from the leaders, I feel friendlier when getting into an environment completely different from the schools. Since then, I feel more motivated and constantly improve to learn more knowledge and experience about the career.

In addition, the Company also has a support policy for students to practice, to motivate their spirit of learning and improve their work responsibilities. After finishing my internship, I hope to continue to have more opportunities to stay and work on the project with a new position. If wearing a uniform with the company logo will be the proudest thing for a new student like me. I myself will have to strive, make more effort, be responsible, and work more disciplined to respond the trust and help from the Board of Directors. I would like to express my deepest thanks to the Board of Directors of the Company, the Safety Board, the Site Management Board.

Thanks to the approval of the Board of Directors of the company, I and my friends have a successful internship. With extensive knowledge and long-term work experience in the profession, the Board has taken very reasonable steps to support students during their internship at the project, so that they can complete their job well assign, support me to collect data in the field for me to apply in the report and it is a bloody experience to help me devote more and more to my career.

With clear policies, procedures, regulations, years of experience management, and the talented management of the Board of Directors, Phuoc Thanh Construction Corporation has been stable for over 15 years at the marketplace full of harshness. Looking at the process of formation and development of the Company, it is enough to see that the brains of the company are talented, enthusiastic, and live hard people for the job and for the Company.

It will be forever happy memories, beautiful memories connecting friends together, and colleagues in the future. With the desire to pursue a career as a Labor Safety Engineer, the students did not hesitate to move forward, no success came by themselves, so go on your own to earn your own success. The path is short or long, some are far and near, but there is no peaceful road to reach glory. Only the efforts, diligence, hard, trying to learn, and comply, the way to success is closer and closer. Trying then soon be successful.

News

Ground Breaking Ceremony Of Hi-Tech Ready-Built Factory

GROUND BREAKING CEREMONY OF HI-TECH READY-BUILT FACTORY

-At 08:30 AM on Friday, July 10th, 2020, at FACTORY 01 – HI TECH READY-BUILT FACTORY at Lot I-3B 1.1, N6 Street, Saigon Hi-Tech Park in District 9, Ho Chi Minh City, the groundbreaking ceremony was taken place by the owner. This project is invested by TLD Hi-Tech Company

– Attending the groundbreaking ceremony, in addition to the representative of the Owner, the Supervision Unit, the participation of Project Directors and Site Managers from other projects to congratulate the event.

– Attending the ceremony included:

• Ms. Pham Thi Thanh Hang – General Director of Phuoc Thanh Construction Corporation

• Mr. Hoang Vu Nhat – Project Director

• Mr. Tran Viet Tuy Hai – Head of Safety Department

– Completing a project on schedule with the best quality and safety is one of the mottoes that Phuoc Thanh always commits to bringing to customers. With experience, competence, and sincerity, PTCONS will complete the project as committed to the Owner.

– Congratulations to HI-TECH READY-BUILT FACTORY with future success!

Some photos at the ceremony:

GROUND BREAKING CEREMONY OF HI-TECH

GROUND BREAKING CEREMONY OF HI-TECH

GROUND BREAKING CEREMONY OF HI-TECH

PHUOC THANH: “Partner’s success is ours”

(News, photos: PR department)

General News, News

Groundbreaking Ceremony Of Vinatex Office – Apartment Building Project

GROUNDBREAKING CEREMONY OF VINATEX OFFICE – APARTMENT BUILDING PROJECT

– In the morning of June 6th, 2020, the groundbreaking ceremony of Vinatex Building office and apartment building project took place at 39-41-43 Vo Van Kiet street, Nguyen Thai Binh Ward.

– This is a project belonging to the owner – Vietnam National Textile and Garment Group (VINATEX)

– Attending the groundbreaking ceremony in addition to the representative of the Owner, the Supervisory Unit, the participation of a large number of Project Directors and Site Managers from other works on congratulation for this event.

LỄ KHỞI CÔNG DỰ ÁN CAO ỐC VĂN PHÒNG – CĂN HỘ VINATEX BUILDING

Attending the ceremony include:

  • Ms. Pham Thi Thanh Hang – General Director of Phuoc Thanh Construction Corporation
  • Mr. Nguyen Minh Tuan – Project Director of this project
  • Mr. Tran Minh Thien – Project Director
  • Mr. Tran Viet Tuy Hai – Head of Safety Department

– Completing a project on schedule with the best quality and safety is one of the mottoes that Phuoc Thanh always commits to bringing to customers. With experience, competence, and sincerity, PTCONS will complete the project as committed to the Owner.

Some photos at the ceremony:

 

Phước Thành: “Sự thành công của Đối Tác chính là sự thành công của Chúng Tôi”

 

 

 

News

Ground Ceremony Of Hung Phat Social Housing Project – Block C

GROUND CEREMONY OF HUNG PHAT SOCIAL HOUSING PROJECT – BLOCK C

On the morning of July 16th, 2020, the topping-out ceremony of Hung Phat social housing project took place successfully with the full participation of partners and the owner – 276 Ngoc Long Company.

GROUND CEREMONY OF HUNG PHAT SOCIAL HOUSING PROJECT

– Being built at 2225 Pham The Hien Street, Ward 6, District 8, Green River Apartment Area is adjacent to 4 main streets front, in front of the project is District 8 traditional market, right behind is high school.

– Hung Phat Social Housing Project – Green River Apartment is considered as one of the social housing projects of which Phuoc Thanh is the general contractor. With the relentless efforts of all engineering engineers, Block C of the project has now been topped up.

Some photos recorded at the ceremony:

GROUND CEREMONY OF HUNG PHAT SOCIAL HOUSING PROJECT

GROUND CEREMONY OF HUNG PHAT SOCIAL HOUSING PROJECT

GROUND CEREMONY OF HUNG PHAT SOCIAL HOUSING PROJECT

GROUND CEREMONY OF HUNG PHAT SOCIAL HOUSING PROJECT

 

GROUND CEREMONY OF HUNG PHAT SOCIAL HOUSING PROJECT

PHUOC THANH: “Partner’s success is ours”

(News, photos: PR department)

Internal news, News

Groundbreaking Ceremony Of Office Building Project – Apartment Vinatex Building

Ground breaking Ceremony Of Office Building Project – Apartment Vinatex Building

– In the morning of April 23, 2019. At 39-41-43, Vo Van Kiet Street, Nguyen Thai Binh Ward, the groundbreaking ceremony of the Vinatex Building office and apartment project took place.

– This is a project of the investor, Vietnam National Textile and Garment Group VINATEX

– Attending the groundbreaking ceremony, outside the representative of the Investor, the Supervisory Unit, the participation of a large number of Project Directors and Commanders from other projects to congratulate this event.

Attending the ceremony include:

  • Mr. Nguyen Cao Tri – Deputy General Director of Phuoc Thanh Construction Joint Stock Company
  • Mr. Nguyen Minh Tuan – Project Director of the project
  • Mr. Nguyen Hoang Phuc – Director of Viet Phuc company
    Mr.: Vo Tan Sy – Head of Technical Department
  • Mr. Nguyen Hoang Viet Nha – Head of Bidding Department
    Mr. Hoang Vu Nhat – Project Director
  • Mr.: Tran Minh Thien – Project Director
  • Mr. Tran Viet Tuy Hai – Head of safety department
  • Mr. Phan Minh Triet – General Director of Van Hien University Project
  • Mr. Huynh Tan Nhan – Director of Khoi Thanh project

– Cùng tập thể Anh Em BCH từ các công trường khác về tham dự trong buổi lễ khởi công .

Nghi thức lễ cúng khởi công

– Completing on schedule with the quality and safety of the project is one of the mottos that Phuoc Thanh is always committed to bringing to customers. With experience, capacity and sincerity, Ptcons will complete the project as committed to the Investor.

Nghi thức xúc cát

Một số hình ảnh tại buổi lễ:                     

Chụp hình lưu niệm cùng chủ đầu tư

Các giám đốc dự án, trưởng phòng ban cùng chúc mừng cho dự án mới

Ban an toàn công ty Ptcons cùng chúc mừng dự án mới

Phước Thành: “Sự thành công của Đối Tác chính là sự thành công của Chúng Tôi” 

Tin ảnh: Phòng Truyền Thông Ptcons